Відео

All staples are "crown" staples. These are NARROW crown staples. Driven by a narrow crown stapler. Staples are made is wide range of crown sizes and wire gauges. The crown is the part of the staple that remains while the staple legs are driven into the substrate. This one drives 1/4 inch or 6mm crown staples made from 18ga wire. Staples compared to brads have much more holding power as they won't pull through the affixed piece nearly as easily. When driving them into wood, always try to orient the crown perpendicular to the grain of the wood for maximum pull through resistance.

Look at those gaps 😯

All religions' icons and revered/respected people and god(s): Meanwhile its followers: 🤪👉💀🗣️🗿🥱👌😭🤬

Good stuff. how do you make the mud so yellow? its great. easy to see the second coat.

The banjo has been obsolete since the 50s . Dude get a Bazooka

Fiber fuse…..hope you are using hot mud on that speed bump that you are building…..dude you call that Flat?

I’m thinking this is your first day on the job…?

Use tape on corners and you won’t have to waste time loading up this crappy Bead

Impressive guys, well done

2020: toilet paper 2023: eggs 2024: stanley cups and tote bags A damn shame 😂

What the hell he insult Hinduism you,r the #$!@

You can not tape and cote in the same mix. Got to let shit dry.

Don’t you let the first coat set before second coating

Hey lads appreciate your clean net work but isn’t tapping in when you have coated everything angles internals extra? That’s were the time is!! Also unsure why you coat tape again after taping do it at the same time would save you time.

He was... painters

Is that drywall secured to the studs my code? Very few screws I see.

Inaccurate... Lord Ganesha is vegetarian.

Great teaching, great learning, kudos to you 🫡

Good job i went this material

I wanted to see you use the heat gun I wanted to learn your techniques please do a in detail video on using the heat gun to dry the mud. Maybe someday we could get together and do a barbecue

What kind of screw guns do you guys use ? What brand

Can you guys do a video on care and maintenance if tools? How do i get the buildup off the corners of ny hawke, or the plaster buildup off the handles of my tools?

Whoever read the numbers for that notch out.... my goodness

Tuyệt vời

Necesito una caja de esto donde puedo conseguir en España

Your flats need more mud. I always used a new knife to check ,proper fill the blade (on edge) slightly touches full span of flat(when dry it’s right on the money, and only requires 2 coats not 3 , the time spent 3rd coating would be better spent sitting in the Bar. ) if it doesn’t you can fine tune the setting on the box. If on your first coat with box set on 2 it is too much and 3 is hollow like yours fine tune your box . You can adjust an Ames box to 1000 of an inch.if there is no way to adjust your box….throw it in the trash

If you are a homeowner just do it by hand. Banjos have been obsolete since the 60s.

Hey bud, I'm in qld and we flooded downstairs, all the gyprock has been ripped up to 1200mm from the floor. Pretty keen to make sure this never happens again. I've waterproofed the external perimeter and now I want to make sure it's bulletproof inside. How water resistant is this stuff? I'm an amateur and will be doing it myself AGAIN

Nice clean job!! Very professional!!!

Well it is just tape

Dang... I just finished drywalling a small place by myself and am left mouth agape watching this... absolutely incredible

Great video! I love the technique used. I like it more than some of the fancy YTubers use. Can't wait to try it this weekend. I'm doing a huge project and I'm super green so I'm always looking for ways to get better and more efficient.

Piggy Riddel, 😂

No 👎🏼

What adhesive is that ❤

I'm sick of people disrespecting Christ. They respected Islam but not Christianity. Leave religion out of comedy. There's a time and place.

These guys are good.

Must be nice to save so much time since you use crown(cornice) in the inside corners. Almost nobody does that here in the US... even if someone is going to use it they expect flawless inside corners which they they still cover up lol.

I have. Been doing drywall 51 years i tkink wallboard make the best knives llike blue steel seems to get the wall smooth

Nice a quiet. Nice spray pattern too.

Why do you use nail on bead,Is it because the hangers install beads because the finishers don’t know how? Metal tape on is a superior product. With tape on you don’t waste time packing the bead before you coat

8:34 those are some big gaps

What products do you recommend?

Music ruined this video, I couldn't understand much of what was being said.

So if i knock off all my old cornice, I can replace it with the same size?. If I sand and skimcoat the plaster!?

It took like an hour? 😮

Thanks

Gnarly vid bro. That's one sweet setup! Definitely got me inspired.

not australians